kamstrup_logo_red_medium-min
Elektros apskaitos prietaisas Kamstrup 162

Elektroninis išmanus elektros skaitiklis

• Vienfazis buitinis elektros skaitiklis
• Paruoštas darbui su „Išmanaus namo” sprendimais
• Optimizuotas nuotoliniam nuskaitymui
• Apsaugotas tamperiu
• Atsparus tiekimo tinklo trukdžiams
• Ypatingai mažas energijos suvartojimas.
• Aktyvios energijos tipo patvirtinimas EN 50470-1 (MID) ir  EN 50470-3 (MID) aktyvios ir reaktyvios standartai IEC 62052-11, IEC 62053-21, IEC 62053-23.

Kamstrup 162M is a direct connected electricity meter for registration of electric energy. The
meter is full electronic without movable parts. Thus, energy registration is not affected by
shock or impact during transport and mounting. Furthermore, mea-surements are correct, no
matter the physical mounting direction.
The shunt measuring principle secures good linearity and a considerable dynamic range. At
the same time, the shunt measuring principle is immune to magnetism and DC currents.
The easily readable display scrolls automatically between readings, or readings can be
changed manually by the consumer activating a push button. The required display readings
as well as their order are configurable.
In addition to being read from the display, data can be collected via the optical output or from
the module area. The unique module area also permits external changing of tariffs, pulse
inputs and outputs, and configuration as well as a wide range of communication media.
From the factory, the meter can be configured to measure both imported and exported
energy. Measurements are saved in a permanent memory.
As default, Kamstrup 162M can generate load profiles in all four quadrants.
A load profile provides detailed information about consumed and produced energy. An
additional logger with 16 channels contains data for analysis purposes.
As default, Kamstrup 162M is supplied with the functions Smart Disconnect and software
controlled Prepayment.
In order to minimise the manual configuration during installation, the meter is pre-configured
from the factory. Furthermore, the meter can be reconfigured via a Smart Metering system.